Monday, December 26, 2011

CANBUS OBDII Check Engine Auto Scanner Trouble Code Reader

CANBUS OBDII Check Engine Auto Scanner Trouble Code Reader Review



CANBUS OBDII Check Engine Auto Scanner Trouble Code Reader Feature

  • Advanced Canbus OBD2 Reader for most cars after 1996
  • The MaxiScan® MS300 code reader supports all OBD II protocols, including the newly released Controller Area Network (CAN) protocol. Though it is small, it is able to retrieve same information as large expensive scanners!
  • Works with all 1996 and newer vehicles that are OBD II compliant (including CAN) · Read and clear generic and manufacturer specific ? Diagnostic Trouble Codes (DTCs) and turn off ? check engine light
  • Support multiple trouble code requests: generic codes, pending codes and manufacturer specific codes · Review the emission readiness status of OBD monitors · Determine the malfunction indicator lamp (MIL) status · Retrieve VIN (Vehicle Identification No.) on 2002 and ? newer vehicles that support Mode 9 · Easy to use with one plug-in · Free CD software with over 7000 DTC definitions · No batteries needed-powered via detachable OBD II cable
  • Display: Backlit LCD, 2-line, 8 characters Operating Temperature: 0 to 50 C (32 to 122 F) Storage Temperature: -20 to 70 C (-4 to 158 F) Power: 10.0 to 15.5 Volts provided via vehicle battery Dimensions: Length Width Height 113 mm ( 4.4") ???74 mm ( 2.9") 21mm (0.83") NW: 0.25 Kg(0.45lb), GW: 0.27Kg(0.50lb)
Display: Backlit LCD, 2-line, 8 characters Operating Temperature: 0 to 50 C (32 to 122 F) Storage Temperature: -20 to 70 C (-4 to 158 F) Power: 10.0 to 15.5 Volts provided via vehicle battery Dimensions: Length Width Height 113 mm ( 4.4") ???74 mm ( 2.9") 21mm (0.83") NW: 0.25 Kg(0.45lb), GW: 0.27Kg(0.50lb)


No comments:

Post a Comment